|   
Phil's Fly Box:The Silly Creek Saviour
  
              with  Philip 
              RowleyWebsite 
              | Email
 
 
        
           |  |  
           | 
 
Step               1
: 
 
Cover               the hook shank with roughly 13 wraps of .010 lead wire substitute.               Attach the tying thread and lock the lead wire substitute in place               both fore and aft.
 |  
Prior to the emergence of salmon fry Cutthroat trout must hunt down other         sources of food. On many of the rivers and streams dotting the eastern         Fraser Valley stonefly nymphs are a valuable source of nourishment. Requiring         turbulent water to survive, stonefly nymphs crawl and forage amongst the         rocks and rubble along the bottom. Feeble swimmers, the nymph's active         habits often get them swept adrift, either landing further downstream         or into the gullet of a feeding Cutthroat. 
        
           |  |  
           | 
 
Step               2 
: 
 
Select               two black goose or turkey biots and secure in place at the rear               of the hook. Make sure the biots natural curvature runs away from               each other to form a distinct forked tail. The finished tail should               be about half the shank in length. Once the tail is finished tie               in the fine copper wire ribbing.
 |  
The Silly Creek Saviour is the creation of Ryan Pohl a sales representative         based in Chilliwack. Some of Ryan's product lines include; Lamiglas Rods,         Aqua Design Clothing and Guideline fly lines. New players on market, Guideline         fly lines offer no memory and are a beautiful line to cast, give one a         try.  
Ryan began experimenting with his own stonefly designs some eight or         nine years ago. His quest focused around finding the right dubbing mix         for the body. After much trial and error Ryan's search brought him back         to a Canadian basic, black seal's fur. The natural translucence of seal's         fur is tough to beat on any pattern including stonefly nymphs. For the         wingcase pink pearl Krystal Flash surpassed all other competitors, including         traditional mottled turkey and other wing quill choices. The Krystal Flash         sparkle was just the pizzazz this design needed. The finished result was         a suggestive pattern reminiscent of the traditional Idaho Nymph. In size         6 the Silly Creek Savior has become a lethal cutthroat pattern tied in         larger sizes up to #2 it has become a favorite pattern of Ryan's for both         summer and winter run steelhead.  
Ryan's primary method of presentation is a floating line and leader up         to 15 feet in length. The goal is to bounce the pattern on or near the         bottom to simulate the tumbling of a dislodged nymph. For the unoffended,         strike indicators are a great method to control and place the fly consistently         throughout the drift. This fly works in the slow margins too, even though         these waters are not considered prime stonefly habitat.  
The Silly Creek Saviour
 
        
Hook: Tiemco 2302 or Tiemco 700 #8-#2 Steelhead) Weighted
Thread: Black 6/0
Tail: Black Goose or Turkey Biots
Rib: Fine Copper Wire
Body: Black Seal's Fur
Wingcase: Pink Pearl Krystal Flash
Thorax: Peacock Herl
Hackle: Black Saddle Hackle 
        
           |  |  |  
           | 
 
Step               3 
: 
 
Form               a dubbing loop and insert black seal's fur dubbing. Place the dubbing               into the loop at the bottom and slide it up into position, continue               until the dubbing loop is loaded. Spin the dubbing loop tight until               the fibers radiate out perpendicular to the loop. Wind the body               forwards to the 2/3rds point on the shank. Tie off and trim the               excess dubbing noodle. 
 | 
Step               4 
: 
 
               Counter wind the fine copper wire rib forward over the body. Tie               off and break of the excess wire by placing the thumbnail on the               tie off junction and using a pulling and twisting motion with the               opposite hand. 
 |  
           |  |  |  
           | 
Step               5 
: 
 
Tie               in about 12 strands of pink pearl Krystal Flash for the wingcase               followed by 3 strands of peacock herl. Tie in the peacock herl in               by the tips to ensure a full thorax, to help build up the thorax               dub a foundation of black seals fur dubbing.
 | 
Step               6 
: 
 
Wind               the peacock herl forward over the thorax foundation and tie off.
 |  
           |  |  |  
           | 
Step               7 
: 
 
Tie               in a black saddle hackle. Wind the saddle around the hook 2 to 3               times. Sweep the black saddle down and back to form a semi circular               hackle. Pull the Krystal Flash over the thorax and tie off.
 | 
Step               8 
: 
 
Build               up a neat head, whip finish and apply head cement. To identify this               weighted pattern amongst the other residents in the fly box try               a dab of red nail polish on the hook eye. Be careful not to clog               the hook eye.
 |   
 |